当前时间:
2014年2月7星期五下午9:10:34
当前位置:首页  »  应用选型
Application Notes of NTC thermistors英文版
来源:本站  更新时间:2016-05-06 17:59:50  查看次数:

       便于国外顾客朋友更精准、高效选用深圳市富温传感技术有限公司生产的NTC热敏电阻、温度传感器产品,现推出负温度系数NTC热敏电阻在应用选型时必须注意的事项和温度测量的选择标准表

Application Notes of NTC thermistors
How to order
Selection criteria for temperature measurement are
1. Purpose
Temperature measurement, temperature record, temperature control, temperature compensation, and so on

2. Environment
In air, in water, in the sea water, humid air, acid or basic atmosphere, and so on

3. Reliability test
Heating-cooling cycle, heat shock, wet resistance, heat resistance, cold resistance, and so on

4. temperature range
_____________℃ ~ ___________________ ℃

5. shape, model and dimensions
_____________________________________________

6. Resistance range
_________ KW ± ______ % at ______ ℃

7. B value (selection according to this product catalog)
B (_℃/__℃) = ___ K ± ___ %

8. Thermal time constant
_____ S ~ ______ S  in _________ (environment)
 
 
Options
1. tube or case can be added on request
2. connecting termination can be machined
3. manufacture to meet special request (for parameters, shape)
 
Selection notes
1. Although thermistor can resistant to heat shock in the cycle of room temperature to 200℃, any sharp change in temperature still should be avoid as the sealing material is glass and ageing in ceramic semiconductor may occur.

2. The current flowing through thermistor leads to error in temperature due to self heating of the element. The error is about 0.1℃ when self heat of the element is 1/10 of dissipation factor, and 0.01℃ for 1/100.

3. Because of insulation failure in electric circuit and electrostatic induction, wrong wire connection could damage the thermistor due to too much current flowing through the ceramic semiconductor. Wire connection must be sure that no over current passes through the element.

4. It is better to start the measurement after 7 times, at least 5 times thermal time constant.

5. When used in the system where high accuracy is required or the ageing is not expected in ceramic semiconductor, a high reliable thermistor semiconductor should be applied which has been certificated by test at high temperature.

6. In the case of metal tube protection, the deepness of inserting should be greater than 25 times of tube diameter in order to avoid error due to heat leakage. In the case of nonmetal tube, the deepness should be greater than 15 time of the diameter.

7. Water drops, dust layer or ionic compounds formed between leads and on the surface of insulations can lead to decrease or being unstable in appearance resistance. This then leads to a measurement error. Therefore, the elements should be kept in dry conditions by taking such measures as wet protection, insulation etc..
 

需要NTC热敏电阻样品的国外客户,请将以上内容填写完整,便于温度传感器专业生产厂家深圳市富温传感技术有限公司WWW.FUWENNTC.COM准确、高效的为您免费提供样品和RT表
 

Copyright©版权所有:深圳市富温传感技术有限公司 电话:0755-29402582  
全国免费电话:4009605108 邮箱:ntcfuwen@foxmail.com 地址:深圳市宝安区沙进街道万丰荣泰科技园B栋5楼 粤ICP备:13020894号
  • 富温传感在线咨询

    富温传感在线咨询